Tie Line Routing Table - Panasonic KX-TD816CE Installation Manual

System Programming
Description
Selection
Default
Programming
Conditions

TIE Line Routing Table

The TIE line routing table can be programmed. This table is
referenced by the system to identify the CO line route, when an
extension user makes a TIE call.
A routing pattern appropriate for each call is decided by the first
three digits (except the TIE line access code) of the dialed
number. This program assigns the TIE line access code and CO
line group hunt sequence.
• Location number: 01 through 32
• TIE line access code: 1 to 3 digits
• CO line group hunt sequence number: 1 through 8 (5 entry max.)
All locations – Not stored
1. Enter 340.
Display example: TIE Route
2. Press NEXT.
Display: Location
3. Enter a location number.
To enter location number 01, you can also press NEXT.
Display example: 01:
4. Enter a TIE line access code.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number.
5. Press to program the CO line group hunt sequence number.
6. Enter a CO line group hunt sequence number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number.
7. Press STORE.
8. To program another location, press NEXT or PREV, or
SELECT and the desired location number.
9. Repeat steps 4 through 8.
10. Press END.
• Each TIE line access code has a maximum of three digits, consisting of
0 through 9 and . The character " " can be used as a wild card
character.
• Program [341] "TIE Removed Digit/ Added Dial" is used to modify the
TIE line access code.
NO?→
,
340
41