Tie Incoming Assignment - Panasonic KX-TD816CE Installation Manual

432
Description
Selection
Default
Programming
Conditions
44

TIE Incoming Assignment

Assigns a TIE incoming method, immediate or wink, to each TIE
table according to your central office service.
Immediate: Incoming TIE calls can be received right after the
receiving signal arrives.
Wink: Incoming TIE calls can be received after the wink signal is
transmitted to the central office (after the receiving signal
arrives).
• TIE table number: 1 to 4,
• Immediate / Wink
All DID / TIE tables – Wink
1. Enter 432.
Display: TIE Signal In
2. Press NEXT.
Display: Table NO?→
3. Enter a TIE table number.
To enter TIE table number 1, you can also press NEXT.
Display example: 1:Wink
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another TIE table, press NEXT or PREV, or
SELECT and the desired TIE table number.
7. Repeat steps 4 through 6.
8. Press END.
To assign all TIE tables to one selection, press the
this case, the display shows the contents programmed for TIE table
number 1.
System Programming
( =all TIE tables)
key in step 3. In