Table of Contents
Advertisement
424
Description
Selection
Default
Programming
Conditions
Feature References
20
4.6
CO Line Programming
ISDN Port Type
Assigns the type of each port either CO line or extension line on
ISDN port basis.
• Port number: KX-TD816—01 through 04,
KX-TD1232—01 through 12,
• CO (CO line) / Extension
All ports – CO
1.
Enter 424.
Display: ISDN Line Type
2.
Press NEXT.
Display: Port NO?–>
3.
Enter a port number.
To enter a first port number, you can also press NEXT.
Display example: #01:CO
4.
Keep pressing SELECT until the desired selection is
displayed.
5.
Press STORE.
6.
To program another port, press NEXT or PREV, or
SELECT and the desired port number.
7.
Repeat steps 4 through 6.
8.
Press END.
• For the KX-TD816, port numbers 05 and 06 are fixed as "Extension."
• For the KX-TD1232, port numbers 01 through 06 are for the Master
System and 07 through 12 are for the Slave, if available.
• To assign all ports to one selection, press the
case, the display shows the contents programmed for a first port.
• After this assignment, you should reset the system so that this
assignment is effective.
None
(
=all ports)
(
=all ports)
key at step 3. In this
Advertisement
Table of Contents
