#55801 COMPONENTS LIST
DUL-770
Millivolt Board Assembly
OKA-035
Burner Tube
700-203
Manual Gas Shut-off Valve
OKA-G900
Refractory Set
DUL-500
Log Package
OKA-005
Glass Valance
700-11T
Glass with gasket
OCK-S54A
LP Conversion Kit
900-085
4" Restrictor Plate
PLACEMENT CLEARANCE REQUIREMENTS
This fireplace must be installed on a level surface capable of supporting the fireplace and venting.
Fireplace must be placed directly on wood or non-combustible surface (not linoleum or carpet) extending entire depth and width of
fireplace.
Due to high surface temperatures, fireplace should be located out of traffic and away from furniture and draperies.
This fireplace may be installed in a bedroom.
Please be aware of the large amount of heat this fireplace will produce when determining a location.
INSTALLATION OVERVIEW
1.
Determine fireplace location.
2.
Install hearth (if applicable).
3.
Install option al fan (if applicable).
4.
Install venting.
5.
Complete gas line installation.
6.
Complete electrical hook-up.
7.
Install logs.
8.
Verify proper operation of fireplace and all components.
NOTE: The qualified installer should follow procedure best suited for installation.
POSITION FIREPLACE
Determine exact position of your fireplace, including hearth height, width, and depth, (if applicable). If possible, place fireplace in such a
manner that vent termination will be placed between two studs, eliminating the need for additional framing.
ATTENTION: MOBILE HOME INSTALLATIONS:
FIREPLACE MUST BE SECURED TO FLOOR OR HEARTH!
SPECIFICATIONS
PAGE 7