Brocade Communications Systems FCX Series Hardware Installation Manual page 58

Installing the FCX Switch
CAUTION
Power-down your device before you install or replace a module for safety purposes and to
avoid instability due to a delay in power cycling.
FIGURE 42 Two-port 10 Gbps SFP+ module
TABLE 21
LED
Link or Act LED (Link or
Activity
56
10 Gbps SFP+ module port status LEDs
Condition
On or flashing green
Off
Status
Port has a valid link at 10 Gbps.
Flashing indicates activity.
The port is down.
Brocade FCX Series Hardware Installation Guide
53-1002977-01