Brocade Communications Systems FCX Series Hardware Installation Manual page 32

Product Overview
TABLE 12
LED
FIGURE 22 System status LEDs
1.
TABLE 13
LED
PS1
PS2
(Power Supply Status)
Diag
(Diagnostic)
Out-of-band ManagementLink or
Activity
FIGURE 23 Power status LEDs
30
Port status LEDs
Condition
Off
System status LEDs
System status LEDs
Status
A link is not established with a remote port.
Condition Status
Green Power supply is operating normally. It is installed
properly and the power cord is attached to a power
source.
Amber Power supply fault. The power supply may not be
installed properly.
Off Power off or failure.
Flashing Green System self-diagnostic test in progress.
Green System self-diagnostic test successfully completed.
Amber System self-diagnostic test has detected a fault.
(Blower, thermal or any interface fault.)
On/Flashing Green The port has established a valid link at 10/100/1000
Mbps. Flashing indicates the port is transmitting and
receiving user packets.
Off A link is not established with a remote port.
Brocade FCX Series Hardware Installation Guide
53-1002977-01