Brocade Communications Systems FCX Series Hardware Installation Manual page 22

Product Overview
NOTE
The 1 Gbps SFP and 10 Gbps SFP+ modules are not hot-swappable.
FIGURE 15 Four-port 1 Gbps SFP module
TABLE 5
LED
Link or Act LED (Link or
Activity)
FIGURE 16 Four-port 10 Gbps SFP+ module
TABLE 6
LED
Link or Act LED (Link or
Activity)
NOTE
The two left ports on the SFP+ module do not pass regular Ethernet traffic by default. The stack
disable CLI command must be configured on these two ports in order for them to pass regular traffic.
20
Four-port 1 Gbps SFP module status LEDs
Condition
On or flashing Green
Off
Four-port 10 Gbps SFP+ module status LEDs
Condition
On or flashing Green
Off
Status
Port has a valid link at 1 Gbps. Flashing
indicates activity.
The link is down.
Status
Port has a valid link at 10 Gbps. Flashing
indicates activity.
The link is down.
Brocade FCX Series Hardware Installation Guide
53-1002977-01