Brocade Communications Systems FCX Series Hardware Installation Manual page 44

Installing the FCX Switch
The default stacking ports on FCX S/S-F devices are the ports in the 16/10 Gbps CX4 stacking
module on the rear panel. The default stacking ports on the FCX E/I devices are the first two ports in
the four-port 10 Gbps SFP+ module on the front panel.
Refer to the table below for the list of supported XFP transceivers (for stacking and non-stacking FCX
models) and supported SFP and SFP+ transceivers.
TABLE 17
FCX S/S-F
16/10 Gbps
CX4 stacking
module
2-port 10
Gbps XFP
module
FCX E/I
42
Stacking ports on Brocade FCX Series devices
Panel/slot Ports
Rear/2 1,2
Front/3 1,2
Stacking ports
Default Can be data
stacking ports
Yes: 1, 2 Yes
Brocade FCX Series Hardware Installation Guide
Data ports
Default data Can be
stacking
ports
Yes: 1, 2 Yes: 1, 2
53-1002977-01