Brocade Communications Systems FCX Series Hardware Installation Manual page 31

Port, system, and power status LEDs for Brocade FCX 624-E, FCX 624-I, FCX 648-E, and FCX 648-I
Port, system, and power status LEDs for Brocade FCX 624-E, FCX 624-I, FCX 648-E, and FCX
648-I
FCX switches include a display panel for key system and port indicators that simplifies installation and
network troubleshooting. The LEDs are located on the front panel for easy viewing.
FIGURE 21 Port status LEDs
1. Port status LEDs
2. SFP or SFP+ port status LEDs
TABLE 12
LED
Ethernet(1~24/48)
Link or Activity or Speed
SFP(1F~4F)
Link or Activity
SFP+(1F~4F)
Link or Activity
Brocade FCX Series Hardware Installation Guide
53-1002977-01
Port status LEDs
Condition
On/Flashing Green The port has established a valid link at 10/100/1000 Mbps. Flashing
Off
On/Flashing Green The SFP port has established a valid 100/1000 Mbps link. Flashing
Off
On/Flashing Green The SFP+ port has established a valid 10 Gbps link. Flashing
Status
indicates the port is transmitting and receiving user packets.
A link is not established with a remote port.
indicates the port is transmitting and receiving user packets.
A link is not established with a remote port.
indicates the port is transmitting and receiving user packets.
29