Brocade Communications Systems FCX Series Hardware Installation Manual page 28

Product Overview
TABLE 8
LED
Ethernet(1~24/48)
Link or Activity or Speed
HPOE(1~24/48)
SFP(1F~4F)
Link or Activity
SFP(1F~4F)
Speed
FIGURE 19 System status LEDs
1.
TABLE 9
LED
PS1
PS2
(Power Supply Status)
26
Port status LEDs
Condition
On/Flashing Green The port has established a valid link at 1000 Mbps. Flashing
On/Flashing Amber The port has established a valid link at 10 or 100 Mbps. Flashing
Off
On Green
Off
On/Flashing Green The SFP port has established a valid link. Flashing indicates the
Off
On Green
On Amber
Off
System status LEDs
System status LEDs
Status
indicates the port is transmitting and receiving user packets.
indicates the port is transmitting and receiving user packets.
A link is not established with a remote port.
The port is providing HPOE power to a connected device.
The port is not providing HPOE power.
port is transmitting and receiving user packets.
A link is not established with a remote port.
The SFP port is operating at 1000 Mbps.
The SFP port is operating at 100 Mbps.
A link is not established with a remote port.
Condition Status
Green Power supply is operating normally.
Amber Power supply fault.
Off Power off or failure.
Brocade FCX Series Hardware Installation Guide
53-1002977-01