Brocade Communications Systems FCX Series Hardware Installation Manual page 20

SFP interfaces
TABLE 2
Device
Brocade FCX 648-E and
Brocade FCX 648-I devices
with optional 4r-port 10 Gbps
SFP+ module
SFP interfaces
This section describes the network interfaces supported on FCX devices. For information about
supported SFP and SFP+ transceivers, refer to the following Brocade website:
http://www.brocade.com/downloads/documents/data_sheets/product_data_sheets/Optics_DS.pdf
TABLE 3
Interface
1000Base-BX-D
1000Base-BX-U
1000Base-LHA
1000Base-LHB
1000Base-LX
1000Base-LH
1000Base-SX
1000Base-T
100Base-T
10Base-T
100Base-FX
Optional two-port 10 Gbps XFP uplink module
The Brocade FCX 624S, FCX 648S, FCX 624S-F, FCX 624S-HPOE, and FCX 648S-HPOE devices
include a slot on the front panel for a two-port 10 Gbps XFP uplink module. This module operates at
10 Gbps full duplex.
18
Stack unit slots for FCX stackable devices (Continued)
Slot 1
48 10/100/1000 Mbps RJ45 ports
SFP network interfaces
Slot 2
4-port 10 Gbps SFP+
module on front panel
(optional module)
Show Media Description
M-GBXD
M-GBXU
M-LHA
M-LHB
M-LX
M-LH
M-SX
C
C**
C**
M-FX
Brocade FCX Series Hardware Installation Guide
Slot 3
N/A
53-1002977-01