Table of Contents
Advertisement
VB2SX User Guide
Operation
Display Screen
The Display screen will display data when operating it also displays all the menus required to configure the VB2SX via the front panel controls.
On start-up, the display screen shows the unit's firmware version.
During normal operation, the display screen displays Speed (mph or km/h) and the logged file name, as well as the number of satellites that the VB2SX has
locked on to. There are also two satellite status displays.
OK (Green):
Indicates that the VB2SX has sufficient satellites locked to allow normal operation.
SATS (Yellow):
This flashes to indicate that the VB2SX has insufficient satellites and will not be able to operate at all.
WAAS/20cm/40cm (Orange):
This indicates that the corresponding DGPS corrections are available and being used by the unit.
Logged File name:
When an SD card is inserted the file name of the logged file appears on the screen whilst the file is open. A small disk icon to the left of the file name indicates
that data is being logged.
Page 6 of 28
Advertisement
Table of Contents
