Connecting The Ap To The Administrative Computer; Logging In To The Access Point's Web Interface - Ruckus Wireless ZoneFlex 7782 Installation Manual

Preparing the 7782 Access Point at the Depot and Shipping to the Field
Configuring the AP for Management by FlexMaster or for Standalone Operation

Connecting the AP to the Administrative Computer

1. If you are powering the AP with PoE, then continue with
the AP with AC, then continue with
2. Connect one end of the Ethernet cable to the Data In port on the PoE injector.
3. Connect the other end of the Ethernet cable to the administrative computer either
directly or through a hub.
4. You have completed connecting the AP to the administrative computer. Continue with

"Logging In to the Access Point's Web Interface"

5. Connect one end of the Ethernet cable to the PoE IN port on the AP.
6. Connect the other end of the Ethernet cable to the administrative computer.
You have completed connecting the AP to the administrative computer. Continue with
Logging In to the Access Point's Web
Logging In to the Access Point's Web Interface
1. In the address or location bar, type the following address:
https://192.168.0.1
2. Press <Enter> on the keyboard to connect to the AP's Web interface. A security alert
message appears.
3. Click Yes or OK or Proceed anyway (depending on the browser) to continue. The AP's
login page appears.
Figure 13.
22
The ZoneFlex Access Point login page
Step
Step 5.
on page
Interface.
2. If you are powering
22.