Electrical Specifications - Xerox ii LINXSolid Inkjet 100 Service Manual

Electrical specifications

Do not use extension cords of any length or gauge.
WARNING
Primary line voltages
Primary voltage
Power consumption
Current rating
Fusing
NOTE: Fuses are not user-accessible.
Secondary voltages
87–132 VAC (115 VAC nominal)
174–264 VAC (220 VAC nominal)
Input voltage range is auto-sensed.
47–63 Hz frequency range
200 watts standby
300 watts at idle
600 watts during printing
Maximum power consumption is
1000 watts during warmup.
115 VAC configuration:
8 amp max./1 amp min.
220 VAC configuration:
4 amp max./1 amp min.
F1: (DC switcher) 6.3-amp slo blo
F2: (Drum heater 1, reservoir
heater 1, ink melt chambers, cap/
wipe/purge unit) 10-amp slo blo
F3: (Jet stack left and right, paper
pre-heaters, reservoir heaters 2, 3
and 4) 10-amp slo blo
+5V ± 2.5%
+12 V ± 5%
-12 V ± 5%
+40 V -5%, +12%
-52 V ± 10%
+54 V ± 10%
General Information 1-41