Specifications; Physical Dimensions - Xerox ii LINXSolid Inkjet 100 Service Manual

Specifications

Physical Dimensions

Table 1-5 provides the printer dimensions. Table 1-6 provides the
printer clearance requirements.
NOTE: The printer must be mounted on a surface that is flat within 2
degrees of horizontal. All four of the printer's feet must be in contact
with the mounting surface.
Table 1-5. Printer Dimensions
Printer
Height 38.8 cm (15.3 in.)
Width 43.2 cm (17.0 in.)
Depth 59.7 cm (23.5 in.)
Weight 36.0 Kg (79 lbs.)
Table 1-6. Printer Installation Clearances
Top 45.7 cm (18 in.)
Left 10.2 cm (4 in.)
Right 10.2 cm (4 in.)
Front Clearance must be sufficient to replace trays and
clear paper jams.
Rear 10.2 cm (4 in.)
Bottom No obstruction under printer that could block its
cooling vents.
Auxiliary C a r t
Feeder Unit
12.7 cm (5.0 in.) 47.6 cm (18.75 in.)
43.2 cm (17.0 in.) 45.7 cm (18.0 in.)
59.7 cm (23.5 in.) 55.2 cm (21.75 in.)
11.8 Kg (26 lbs.) 23.4 Kg (51.5 lbs.)
General Information 1-39