Xerox ii LINXSolid Inkjet 100 Service Manual page 30

Table 1-4. Configuration Page Settings (continued)
Parameter Description
Wait Timeout Amount of time the image
processor waits for additional
data from a host.
Energy Star time- Amount of idle time allowed
out before the printer switches to
a low energy power down mode.
Intelligent Ready Indicates if the automatic
standby/wake up feature is
enabled.
Media Source Indicates the default tray the
printer uses for self-prints
Upper Tray Indicates the size and type
of tray installed
Lower Tray Indicates the size and type
of tray installed
Print Quality Indicates the combined
setting of the HW Resolution.
Parallel Port Indicates if the parallel port is
Enabled enabled
Language Indicates the language
interpreter in use at the port
Encoding Indicates the type of data
encoding at the parallel port
Job pipelining Indicates if multiple printfile
processing is allowed
Output Device Device used for standard
output and standard error
1-30 ii LINX™ Solid Inkjet 100 Service Manual
Saved in D e f a u l t
NVRAM
yes 40 seconds Any value greater than 14 denoted
yes 67 hours
yes on
yes Upper Tray
no
no
yes High
Resolution
Medical
yes Enabled
yes PostScript
yes Binary
yes Off
yes Parallel
Limits or alternate choices
in seconds; 0 means unlimited
amount of time
Any integer from 1 to 999 denoting
hours.
off
Upper Tray, Lower Tray
Letter, A4
Letter, A4
High Resolution Medical, Draft
Disabled
ACSII (normal), Raw, TBCP
0n
any communication device