Xerox ii LINXSolid Inkjet 100 Service Manual page 238

Removing Maintenance Drawer Counter Connector
Assembly
WARNING
6-48 ii LINX™ Solid Inkjet 100 Printer Service Manual
Allow the printer to cool for 30 minutes.
1. Remove the right, left and top covers.
2. Remove the ink loader.
3. Remove the maintenance drawer.
4. Disconnect the maintenance drawer counter connector
assembly's wiring harness from the power control board.
5. Reach in through the maintenance drawer cavity and squeeze
the snap-fit maintenance drawer counter connector assembly to
free it from the printer frame. Carefully remove it and its
wiring harness.
Reverse these steps to install the maintenance drawer counter
connector assembly.