Xerox ii LINXSolid Inkjet 100 Service Manual page 264

7-16 ii LINX™ Solid Inkjet 100 Printer Service Manual
Install the Driver
1. In the Add Printer Wizard, click Next. Choose Local
printer, the click Next.
2. The Manufacturers and Printers dialog box is displayed.
Click Have Disk.
3. From the Install From Disk dialog box, type:
d:\ (where d is the CD-ROM drive). Click OK.
4. Select the Sterling iiLINX Solid Inkjet 100. Click Next.
5. If prompted that a driver is already installed for this printer,
select Keep existing driver (recommended). Click Next.
6. In the Available ports list, select the port you created during
the first part of the installation (PhaserPortv2.1.0.0). Click
Next.
7. In the Printer name dialog box, give the printer a unique
name if another Sterling iiLINX Solid Inkjet 100 is installed
(for example: SIJ100-Network)
8. At the Setup Complete screen, select (Yes, I want to restart
my computer now).
Your computer will now close all applications and perform a restart.
Your driver will now be ready for use.
Adding a Port to an Existing Printer
Use this procedure to add/change a port for a printer when you have
already installed the driver.
1. Select your printer driver:
a. From the Start menu, select Settings.
b. From the Settings menu, select Printers.
c. In the Printers window, right-mouse click your printer
driver (iiLINX Solid Inkjet 100).
2. From the pop-up menu, choose Properties.
3. When the properties dialog for the printer is displayed, click
Details.