6-52 ii LINX™ Solid Inkjet 100 Printer Service Manual
Removing the Drum Temperature Sensor
1. Remove the right cover,
2. Remove the left cover.
3. Remove the top cover.
4. Remove the ink loader.
5. Unplug the drum temperature sensor from the left I/O board.
6. Remove the screw securing the drum temperature sensor to the
printer frame. Carefully remove the sensor.
Reverse these steps to install the drum temperature sensor.
Drum temperature sensor
Wiring
harness
Sensor
retaining
screw
Figure 6-33. Removing Drum Temperature Sensor
840-4-26