Xerox ii LINXSolid Inkjet 100 Service Manual page 134

3-34 ii LINX™ Solid Inkjet 100 Service Manual
Alternately, select a test by typing its corresponding letter
instead of using arrow keys.
• PgUp and PgDn – Move the display of tests one screen-full at
a time. The highlight block generally stays in place on the
screen, so this also changes the highlighted test.
In the Individual Test column:
• Up and Down arrows – Move the Individual Test selection
highlight block up or down on the screen. When the highlight
block reaches the top or bottom of the screen, it causes the list
to scroll if there are more tests in that direction on the list..
• Space bar – Toggles the Status of the currently highlighted
test: to "Selected" if the test is not selected and to not selected if
it is already selected.
• Left arrow - Moves back to the Test Suite column.
• Alt-S – Toggles the Status of all tests in the Suite which
contains the currently highlighted test: all to Selected if the
currently highlighted test is not selected and all to not selected
if it is anything else. The status of the other tests in the suite is
immaterial.
• Alt-A – Toggles the Status of ALL tests. Like Alt-S, the new
setting for all tests is based on the currently highlighted test,
regardless of the individual settings of the other tests.
• Alt-R – Selects the currently highlighted test and opens the
Run window to prepare to execute the currently selected test.