Daughter Card
Nios System to
Daughter Card
Pin Map
34
Figure 23. F3 Connector Pinouts
Each Ethernet interface (lan91c111) peripheral in your Nios system has an
associated set of I/O pins on your system module. This section describes
how to connect these system-module I/O pins to the daughter card. In
general, you establish these connections by making pin assignments in
your FPGA design. The reference designs included with the kit include
correct pin-assignment information that you can modify for your own
design.
The names given to the system-module I/O ports depends on the name
you provide for the Ethernet interface (lan91c111) peripheral. In
and
Table
5, <your_name> indicates the name you assigned to this
component. The name for some system-module I/O ports also depends
on the tri-state bus you have selected for this peripheral. In
Table
5, <your_bus_name> indicates the name of the bus to which you
assigned this Ethernet interface (lan91c111) peripheral.
Nios Ethernet Development Kit User Guide
Table 4
Table 4
and
Altera Corporation