Table of Contents
Advertisement
Getting Started
Figure 5. Using the Nios EDK with a Workstation or PC Ethernet Jack
Install the
Hardware and
Software Files
f
16
If you are not using a LAN or HUB connection and are connected
directly to a workstation or PC Ethernet jack, insert the female-to-
male RJ-45 crossover adapter to the networking cable and then
connect the adapter to the RJ-45 on the daughter card as shown in
Figure
5.
4.
Connect the other end of the networking cable to your Ethernet LAN
or workstation.
The instructions below are for a Windows PC. These instructions assume
you have already installed or upgraded your Nios Development Kit to
version 2.1 or higher.
1.
Insert the Nios EDK CD-ROM into your CD-ROM drive. The
InstallShield installer begins automatically.
Unix users: See the readme text file for installation instructions.
Nios Ethernet Development Kit User Guide
Altera Corporation
Advertisement
Table of Contents
