Shift Tray Operation: Staple Mode - Ricoh B234 Service Manual

Hide thumbs Also See for B234:

Table of Contents

3.9.4 SHIFT TRAY OPERATION: STAPLE MODE

, feeler [A] and its notched actuator [B] control the movement of the shift

tray when paper is output to the shift tray in the staple mode:

1. A stapled stack is output to the tray.

2. The tray lift motor switches ON and lowers the tray the prescribed distance.

3. Next, the tray lift motor raises the tray and feeler [A] until actuator [B] leaves the

gap of Sensor

4. When the actuator [b] leaves the gap of sensor

and switches the tray lift motor OFF.

This sequence repeats every time a stack is output to the tray until the end of the

job or until the tray becomes full. ( 3.9.6)

B830D010A.WMF

, this switches Sensor

Show Quick Links

Table of Contents