You can search by the registered name, user code, fax number, folder name, e-mail address, or IP-
Fax destination.
5.
Press [Folder].
6.
Press the protocol which is not currently selected.
A confirmation message appears.
7.
Press [Yes].
8.
Press [OK].
9.
Press [User Tools] (
10.
Press [Home] (
) at the bottom of the screen in the center.
Entering the Path to the Destination Manually
When Using the Scanner Application
About how to use the application's screen, see page 49 "[Scanner] Screen".
) on the top right of the screen.
Basic Procedure When Using Scan to Folder
109