Using Optional Status Lights Tower - Neopost IJ-15K User Manual

7.
A three light device may be connected to
the IJ-15K through its serial port #1 (RS232
connection).
IJ-15K will activate the lights based on the
following criteria:
- Green light: Ready to print (as soon as the
- Yellow light: Warning alert. System is
- Red light: Machine not operational. IJ-15K
Yellow flashing light: Approaching printhead cleaning cycle (based
on supervisor set-up)
("WARNING THRESOLD" § 2.3.4)
During the cleaning cycle :
- For the electronic connection both GREEN and orange light
- For the mechanical connection both RED and orange light
After the cycle has completed the green light will return.
Red flashing light: Low postage alert or the time out START/
STOP is going to power off the motors soon (based on supervisor
defined threshold).
4131934X/B
19/06/2007

USING OPTIONAL STATUS LIGHTS TOWER

rollers are running)
operational but requires attention
(Printhead, low ink level, etc.).
is in stand-by mode or there is an error;
such as "cover open", "printhead empty", or "paper jam".
(flashing) are activated.
(flashing) are activated
Optional lights
ORIG0060-41
41