Table of Contents
Advertisement
Enabling/disabling the re-transmission of a
failed transmission ...
Procedure
1 Make sure that the
display shows the initial
waiting mode with date
and time.
2 Press the FUNCTION
key until this appears
on the display --->
3 Press the START key.
4 Press the FUNCTION
key.
5 Press the START key
until this appears on
the display --->
6 Press the </> keys to
see the other values
available:
"RETRANS.DOC: OFF".
7 Press the START key
to confirm your choice
the fax machine return
to the initial waiting
mode.
Hearing the connection tones ...
The fax machine has already been set so that you can
hear the connection tones exchanged between your fax
machine and the remote party, as well as the dialling
tones during the dialling mode. If this is not the case,
program it as follows:
-6-31-38.p65
DISPLAY
AUTOMATIC RX
05-03-99
16:10
FAX SET-UP
DATE AND TIME
VARIOUS SETTINGS
RETRANS. DOC.: ON
RETRANS. DOC.: OFF
AUTOMATIC RX
05-03-99
16:10
35
Procedure
1 Make sure that the
display shows the initial
waiting mode with date
and time.
2 Press the FUNCTION
key until the display
shows --->
3 Press the START key.
4 Press the FUNCTION
key until the display
shows --->
5 Press the START key
until the display shows
--->
6 Press the </> keys until
the display shows --->
7 Press the START key
to confirm the setting,
then press the STOP
key to restore the fax
initial waiting mode.
Adjusting the loudspeaker volume ...
If the volume of either the line tones or the connection
signals seem too low or too high to you, just use the
</> keys to modify it.
Procedure
1 Make sure that the
display shows the initial
waiting mode with date
and time.
2 Press the HOOK key.
3 Press the < or > keys
to increase or decrease
the loudspeaker
volume.
25/02/00, 9.19
DISPLAY
AUTOMATIC RX
02-03-99
10:48
INSTALLATION
TEL. LINE SET-UP
DIAGNOSTICS
LINE MONITOR:OFF
LINE MONITOR:ON
AUTOMATIC RX
02-03-99
10:48
DISPLAY
AUTOMATIC RX
02-03-99
10:48
TYPE NUMBER
_
35
Advertisement
Table of Contents
