Changing The Number Of Rings; To Change Ringing Volume - Olivetti OFX 520 Instruction Manual

Changing the number of rings ...

If the fax machine is set to automatic reception with
call type recognition, when there is an incoming call,
the fax machine will recognise automatically after ring-
ing twice whether the call comes from another fax ma-
chine (FAX) or from a telephone (PHONE).
If you wish you can change the number of times it rings
as follows:
Procedure
1 Make sure that the
display shows the initial
waiting mode with date
and time.
2 Press the FUNCTION
key until the display
shows --->.
3 Press the START key.
4 Press the START key
until the display shows
--->.
5 Press the </> keys to
show the other values
available: "01, 04, 08".
(In the example: "04").
6 Press the START key
to confirm your
selection and then the
STOP key to restore
the fax initial waiting
mode.
32
-6-31-38.p65
DISPLAY
PHONE/FAX RX
30-03-99 12:55
INSTALLATION
TEL. LINE SET-UP
RING COUNT: 02
RING COUNT: 04
PHONE/FAX RX
30-03-99 12:55
32

To change ringing volume ...

You can also change the ringing volume as follows:
Procedure
1 Make sure that the
display shows the initial
waiting mode with date
and time.
2 Press the FUNCTION
key until the display
shows --->.
3 Press the START key.
4 Press the FUNCTION
key.
5 Press the START key
until the display shows
--->.
6 Press the </> keys to
show the other options
available: "RING
VOLUME: LOW",
"RING VOLUME: OFF",
"RING VOLUME: MED".
(In the example: "RING
VOLUME: LOW").
7 Press the START key
to confirm your
selection and then the
STOP key to restore
the fax initial waiting
mode.
25/02/00, 9.18
DISPLAY
PHONE/FAX RX
30-03-99 12:55
FAX SET-UP
DATE AND TIME
VARIOUS SETTINGS
RING VOLUME: HIGH
RING VOLUME: LOW
PHONE/FAX RX
30-03-99 12:55