Changing Date And Time; Only Your Name And Your Fax Number Are Missing; Setting The Name - Olivetti OFX 520 Instruction Manual

CHANGING DATE AND TIME ...

If the date and time on the display are not correct, you
can change them at any time.
Procedure
FUNCTION until the
display shows --->
START
If you think you have made a mistake, press STOP
and repeat the procedure.
START
If you want to select a different format from the one
displayed, press the </> keys.
START
The format is displayed
If you want to select the other time format (12 hour),
press the </> keys.
START
The cursor blinks on the
first digit of the date.
If you have selected the 12 hour time format, the letter
"P" (p.m.) or the letter "A" (a.m.) will be displayed. To
toggle from one letter to the other, press the
FUNCTION key.
Type the new date and
time (e.g. 21-03-99,
10:30). Each time you
enter a digit, the cursor
moves on to the next
one.
If you only want to change some digits, move the
cursor on them using the </> keys and type the correct
digits over them.
START
The procedure for
changing date and time
is now complete.
New date and time will automatically be updated and
will be printed on every transmitted page.
STOP ...
To restore the fax
machine to its initial
waiting mode.
6
-1--1--7.p65
DISPLAY
FAX SET-UP
DATE AND TIME
FORMAT: DD/MM/YY
FORMAT:24 H
DD/MM/YY HH:MM
20-03-99 09:22
DD/MM/YY HH:MM
21-03-99 10:30
VARIOUS SETTINGS
AUTOMATIC RX
21-03-99 10:32
6
If in any operating phase two minutes pass with-
out you entering any data, the fax machine will
automatically go back to its initial waiting mode.
Remember that the waiting mode indicates the con-
ditions of inactivity the fax machine is in.
ONLY YOUR NAME AND YOUR FAX NUMBER
ARE MISSING ...
Once set, the name and number (sender identification)
will remain unchanged, unless modified, and both will
appear on every fax page transmitted.

Setting the name ...

Press KEY
FUNCTION ... INSTALLATION
...until the display shows
--->
START TEL. LINE SET-UP
STATION NAME
FUNCTION (twice)
START TYPE YOUR NAME
_
You can enter a maximum of 16 characters by select-
ing them, one by one, using the numeric keys. Each
numeric key selects cyclically the characters present
in its repertory (see console left side), starting from
the numeric character and proposing the next charac-
ter each time it is pressed. By pressing the keys * and #
you can enter a variety of symbols in your name, e.g. &.
If you want to enter an empty space, simply move the
cursor using the > key without entering any character.
For example, to enter the name "LARA":
Press KEY
TYPE YOUR NAME
5 ...
... until the letter "L" has L
been selected.
TYPE YOUR NAME
> ...
L_
... the cursor moves
forward of one position.
2 ... TYPE YOUR NAME
... until the letter "A" is LA_
displayed.
25/02/00, 9.09
DISPLAY
DISPLAY