Table of Contents
Advertisement
CONSOLE
Some keys may perform several functions, depending on the operational setting of the fax machine:
A
Waiting mode, when the fax machine is not active.
P
Programming mode (access to various menus) after pressing the FUNCTION key.
C
Comnunication mode, during transmission or reception operation.
L
Line mode, after pressing the HOOK key or lifting the receiver.
DISPLAY
Displays on two 16-characters lines:
• Date and time
• Machine status, menu and sub-menu
items, parameters and relative values
• Error messages
• Resolution and contrast values for docu-
ment scanning.
NUMERIC KEYPAD (0-9)
A-L
For dialling the fax machine or tel-
ephone number.
A
If kept pressed for more than one sec-
ond, they automatically selects (if pro-
grammed previously) the telephone or
fax number they are associated with
(one-touch dial feature).
P
Sets any other numeric data.
Selects digits and alphanumeric char-
acters during the setting of numbers and
names.
*
KEY
P
Selects "next" special characters and
symbols during the setting of names.
Dials remote control codes.
A-L
With tone dialling, it transmits a tone down
the line for special network services.
Used for switching temporarily from
L-A-P
pulse (decadic) to tone dialling
(multifrequency).
Console1.p65
1
KEY #
A-L
With tone dialling, it transmits a tone
down the line for special network serv-
ices.
KEY &
"Back" selects special characters and
P
symbols when setting names.
F (FUNCTION)
A
Accesses to programming mode.
P
Selects menus and sub-menus.
When setting the time, it changes (if you
chose the 12-hour time format) the for-
mat from p.m. to a.m. and vice versa.
This feature is enabled only in some countries .
A-L
Pressed while dialling the fax or tel-
ephone number, it associates with that
number the ability to detect a second
tone when dialling, in some telephone
exchanges.
P
It performs the same function for num-
bers programmed under one-touch dial
and speed dialling.
R
L
With the handset lifted, to access spe-
cial functions provided by the network
operator and commonly known as REG-
ISTER RECALL (R function).
25/02/00, 9.07
Advertisement
Table of Contents
