Configuring The Fax To The Telephone Line; Connecting To A Public Line - Olivetti OFX 520 Instruction Manual

CONFIGURING THE FAX TO THE TELEPHONE LINE ...

CONNECTING TO A PUBLIC LINE ...

The fax machine is already set to be connected to a
public line. In any case, check that:
• the "PUBLIC LINE" parameter is selected
• the dialling mode selected (pulse = decadic or
tone = multifrequency) corresponds to that of the
public telephone exchange managing the line to
which the fax machine has been connected. If in
doubt about the selection to be made, ask the pub-
lic telephone network manager.
In some countries the pulse dialling mode =
decadic is not available. In this case, the fax ma-
chine will not show the messages given in steps 5
and 6 of the following procedure:
8
-2--8--9.p65 8
Procedure
1 Make sure that the AUTOMATIC RX
display shows the initial 02-03-99
waiting mode with date
and time.
2 Press the FUNCTION INSTALLATION
key until the display
shows --->.
3 Press the START key. TEL. LINE SET-UP
4 Press the START key. PUBL.LINE (PSTN)
If the fax machine is set for connection to "private
line", press the </> keys to select connection to
"public line".
5 Press the START key. PSTN DIAL:TONE
6 Press the </> keys to PSTN DIAL:PULSE
select the other dialling
mode: "PSTN
DIAL:PULSE".
7 Press the START key AUTOMATIC RX
to confirm the selection 02-03-99
and then the STOP key
to restore the initial
waiting mode of the fax
machine.
25/02/00, 9.13
DISPLAY
10:48
10:48