Table of Contents
Advertisement
RX MODE
Selects reception methods.
A
(HOLD)
L
During a telephone conversation, puts
the call on hold.
</>
Select "next" or "previous" parameter
P
value.
To raise or lower loudspeaker volume
L
after pressing the HOOK key
RESOL.
Adjusts the resolution of the documents
A
to be transmitted (only with the docu-
ment inserted in ADF).
CONTR.
A
Adjusts the contrast of the documents
to be transmitted/copied (only with the
document inserted in ADF).
S. DIAL
A
Followed by two alphanumeric keys (01-
32), selects automatically (if it has been
programmed) the telephone or the fax
machine number associated to them.
CLEAR
P
Clears incorrect settings and program-
ming errors.
LAST TX
A
If pressed once it displays the outcome
of the last transmission.
(REDIAL)
If pressed twice, it redials the last fax
A
number entered (only if the document is
inserted in the ADF).
Redials the last telephone number entered
PAUSE
A -L
Sets a pause between the digits of the
international code, the area code and
the remote party number during the di-
alling of the telephone or fax machine
number.
P
Performs the same function for the num-
bers entered under the speed dialling
and the one touch dialling.
EXTERNAL
If pressed before dialling a number it
A-L
allows access to the public line, if the
fax machine is connected to a private
branch exchange.
Console2.p65
P
"ERROR" LED
STOP
A
.
P
C
HOOK
A
START
L
A-L
P
A
A
.
A
A
1
Performs the same function for numbers
programmed under one-touch dial and
speed dialling.
•
Signals an operating anomaly occurring
during transmission or reception.
Interrupts a copying operation.
Ejects a document from ADF.
Switches off the ERROR led.
Restores the fax machine to the wait-
ing mode.
Interrupts a programming operation.
Interrupts a transmission or reception
operation.
Line setting: equivalent to lifting the
handset.
Starts reception
.
After dialling the fax number, it starts
transmission (only with the document
inserted in ADF).
Confirms the selection of menus, sub-
menus, parameters and related values
and moves on to next procedure
Starts copying (only with the document
inserted in ADF)
.
Reduces or enlarges the documents to
be copied (only with the document in-
serted in ADF). Available reduction and
enlargement values are respectively:
70% and 140%.
Adjusts the resolution of the documents
to be copied (only with the document
inserted in ADF)
.
Adjusts the contrast of the documents to
be copied (only with the document in-
serted in ADF)
.
25/02/00, 9.08
.
Advertisement
Table of Contents
