Dell PowerEdge M820 Owner's Manual page 145

Error Code Message Information
VLT0203
Message
LCD Message
Details
Action
VLT0204
Message
LCD Message
Details
Action
VLT0206
Message
LCD Message
Details
Action
The system board <name> voltage is greater than the upper
critical threshold.
System board voltage is outside of range.
System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the
system may power down in fail-safe mode.
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration,
inspect and reinstall system cables.
3. If the issue persists, see
The system board <name> voltage is outside of the allowable
range.
System board voltage is outside of range.
System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the
system may power down in fail-safe mode.
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration,
inspect and reinstall system cables.
3. If the issue persists, see
The memory module <number> <name> voltage is less than
the lower warning threshold.
Memory module <number> <name> voltage is outside of
range.
System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the
system may power down in fail-safe mode.
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration,
inspect and reinstall system cables.
Getting Help.
Getting Help.
145