Dell PowerEdge M820 Owner's Manual page 137

Error Code Message Information
Details
Action
SWC5001
Message
Action
TMP0100
Message
LCD Message
Details
Action
TMP0101
Message
LCD Message
Details
Action
TMP0102
Message
LCD Message
Details
Action
TMP0103
Message
LCD Message
Details
Action
FlexAddress is not implemented in one of the versions of
firmware. Please update the firmware.
Check firmware versions. Update CMC 1 and CMC 2
firmware to match.
<name> upgrade failed.
Reboot the system and attempt the upgrade again.
The system board <name> temperature is less than the lower
warning threshold.
System board <name> temperature is outside of range.
Ambient air temperature is too cool.
Check the system operating environment.
The system board <name> temperature is less than the lower
critical threshold.
System board <name> temperature is outside of range.
Ambient air temperature is too cool.
Check the system operating environment.
The system board <name> temperature is greater than the
upper warning threshold
System board <name> temperature is outside of range.
Ambient air temperature is too warm or one or more fans
may have failed.
The system board <name> temperature is outside of the
optimum range. Check the fans.
The system board <name> temperature is greater than the
upper critical threshold.
System board <name> temperature is outside of range.
Ambient air temperature is too warm or one or more fans
may have failed.
The system board <name> temperature is outside of the
optimum range. Check the fans.
137