Denso BTH-300BW User Manual page 93

[4.9.2] Setting the FTP
(1) FTP server connection environments screen
F5 key ⇑ ⇓ F6 key
On the SET TCP/IP, FTP and DHCP menu, select "2: SET FTP" calls
up the screen shown at left.
[1] SERVER: Switches to the FTP server connection environments
screen.
[2] OPTION: Switches to the data transfer parameters screen.
Select a desired item by using the numerical keys or F5 and F6 keys,
and then press the ENT key.
To return to the SET TCP/IP, FTP and DHCP menu, press the C key.
On the SET FTP menu, select "1: SERVER" to call up the screen
shown at left where the current settings are displayed.
[1] SERVER IP:
[2] USER ID:
[3] PASSWORD:
[4] DEFAULT DIR:
Select a desired item by using the numerical keys or F5 and F6 keys,
and then press the ENT key. The entry box of the selected item
becomes ready to accept entry and shows a cursor.
Enter the desired value by using the numerical keys and period (.) key
and then press the ENT key.
Pressing the SF key switches the entry mode between the numeric
mode (without a guidance) and alphabet mode.
In the entry mode, to delete a single character, press the BS key. To
delete the whole entry you made, press the C key.
To return to the SET FTP menu, press the C key when any item is
highlighted.
78
Sets the IP address of an FTP server.
Sets a user name.
Sets a password.
Specifies an initial directory through which the
FTP server will search for files for transfer first
when the FTP client gets connected to the
server.