Denso BTH-300BW User Manual page 70

Bar code handy therminal
Table of Contents

Advertisement

If an error occurs during uploading
If some error occurs during uploading, the BHT beeps three times and shows one of the following
screens:
To retry the uploading operation, press the 1 and ENT keys; to abort it, press the 2 and ENT keys.
Problem
The file you attempted to upload is damaged.
Solution
To upload the damaged file as is, press the 1 key.
Problem
Uploading has failed.
Solution
To retry uploading, press the 1 key.
To return to the SYSTEM MENU, press the 2 key. Check the interface
port, communications parameters, and communications protocol in
the SET SYSTEM menu or perform the communications test in the
TEST menu. (Refer to Section 2.5.3, [4.5] and [5.7].)
It is also necessary to check the communications parameters setup of
the host computer.
55
Chapter 2 Getting Started the BHT and System Mode

Advertisement

Table of Contents
loading

Table of Contents