Denso BTH-300BW User Manual page 123

Setting TRANSMIT KEY
[8.1.4] RF parameter initialization screen
Selecting the "5:TRANSMIT KEY" on the WEP KEY definition screen
calls up the screen shown at left.
Select a desired item by using the numerical keys or F7 and F8 keys.
For details about the TRANSMIT KEY, refer to Section 3.1.2.
Pressing the C key will display the confirmation screen as shown at
left.
To save the new entry, choose "1:Yes" and press the ENT key. The
screen will return to the WEP KEY definition screen.
To cancel the new entry, choose "2:No" and press the ENT key. The
newly entered data will be discarded and the screen will return to the
WEP KEY definition screen.
Selecting the "4:INITIALIZE" on the RF parameter menu calls up the
screen shown at left.
To initialize the RF parameters, choose "1:Yes" and press the ENT
key. Initialization will start with the "** Initializing **" displayed. After
completion of initialization, the screen returns to the RF parameter
menu.
To cancel initialization, choose "2:No" and press the ENT key. The
screen will return to the RF parameter menu.
108