Denso BTH-300BW User Manual page 30

BHT-BASIC4.0 Transfer Utility (option)
Running on the host computer, this utility transfers files between the BHT and the host computer, using
YMODEM or BHT-Ir protocol.
Software Structure
System Programs and JIS Level 1 & Level 2 fonts are resident in the system area and user area,
respectively.
To execute user programs, you should download the program files (*.PD4) into the user area.
To use data files (e.g., good master files) required for execution of user programs, you should download
those data files before execution of user programs. Those files will be stored in the user area.
System Programs
The system programs include the following three sets of programs:
Drivers
Drivers is a set of programs that directly controls the BHT hardware. It can be called up by the
BHT-BASIC Interpreter or System Mode.
BHT-BASIC Interpreter
The interpreter interprets and executes instructions in user programs written in BHT-BASIC.
Chapter 2 Getting Started the BHT and System Mode
Host computer
15