Denso BTH-300BW User Manual page 7

How this book is organized
This manual is made up of five chapters and appendices.
Chapter 1 Quick Guide
Describes the basic operating method of the BHT-300BW and the related notes.
Chapter 2 Getting Started the BHT and System Mode
Outlines the system configuration and presents the operating procedures for the BHT-300BW, including
preparation and System Mode operation. In System Mode, you can set various parameters to efficiently
run application programs.
Chapter 3 Communications Operations of BHT
Outlines the BHT's communications capabilities necessary for performing data and program transfer
between the BHT-300BW and host computer or other devices: spread spectrum communication,
infrared (Ir) communication, RS-232C interface specifications, and the basic communications
specifications.
Chapter 4 Error Messages
Lists the error messages which will appear on the LCD if some error occurs in the BHT.
Chapter 5 Handling the CU-300 (Option)
Describes the handling procedure of the communication unit CU-300, the interfacing with the host
computer, and the charging of the battery cartridge. This chapter also describes the LAN-support
communication unit CU-311.
Appendix A: Specifications
Appendix B: A Typical Basic Operation
ii