Denso BTH-300BW User Manual page 119

[8.1.1] ID entry screen
Selecting the "1:ID" on the RF parameter menu calls up the screen
shown at left where the current setting is displayed.
[1] SSID Sets a service set ID to be used on the RF communications
network.
Press the ENT key. The screen enters the alphanumeric entry mode
in which a cursor appears.
Make the desired settings with the numerical keys and period (.) key.
To switch the entry mode between the numeric mode (without
guidance) and alphabet mode, press the SF key. After completion of
settings, press the ENT key.
In the entry mode, to delete a single character, press the BS key. To
delete the whole entry you made, press the C key.
For details about the client name and service set ID, refer to Section
3.1.2.
Pressing the C key when any item is highlighted will display the
confirmation message as shown at left.
To save the new entry, choose "1:Yes" and press the ENT key.
The screen will return to the RF parameter menu.
To cancel the new entry, choose "2:No" and press the ENT key.
The newly entered data will be discarded and the screen will return
to the RF parameter menu.
104