Denso BTH-300BW User Manual page 92

Chapter 2 Getting Started the BHT and System Mode
(3) Timeout screen
On the SET TCP/IP screen, select "3: TIMEOUT" to call up the screen
shown at left where the current settings are displayed.
Select a desired item by using the numerical keys or F5 and F6 keys,
and then press the ENT key. The entry box of the selected item
becomes ready to accept entry and shows a cursor.
Enter the desired value by using the numerical keys, and then press
the ENT key.
F5 key ⇑ ⇓ F6 key
In the entry mode, to delete a single character, press the BS key. To
delete the whole entry you made, press the C key.
To return to the SET TCP/IP menu, press the C key when any item is
highlighted.
77