Program Scans
Since much time and energy has been invested in the planning and programming of your ER-380 /
ER-380M, it is advisable to print a hard copy of the final program for future reference. This copy
should be kept in a safe place.
Program 15 - Program Scans
1. Turn the control lock to the PGM-Mode.
2. To print a program scan, enter 1 5, press the SBTL key.
1
3. In this step, there are three different ways to scan program information. One is PLU, the
other is Macro, and the third is Others.
PLU PROGRAM SCAN
•
To read single PLU program information, enter the number (1-1000) of the PLU and
press the same number and PLU key.
Enter the PLU#,
•
Press a PLU key on the keyboard and press same key again.
PLU 1
•
To read multiple PLU program information, enter the first number (1-1000) and press
PLU key. Press the last number (1-1000) and press PLU key
Enter the first PLU#,
•
Press a PLU key on the keyboard.
PLU 1
MACRO PROGRAM SCAN
•
To read MACRO information, press the MACRO key to be scanned,
ER-380 / ER-380M Electronic Cash Register AU
5
SBTL
up to 15 digits
PLU 1
up to 15 digits
PLU 10
MACRO#
MACRO#
Enter the PLU#,
PLU
up to 15 digits
Enter the last PLU#,
PLU
up to 15 digits
PLU
PLU
Program Mode Programming • 171