Program 80 - Function Key Descriptor Programming - Sam4s ER-380 Operation And Program Manual

Program 80 - Function Key Descriptor Programming

Program descriptions by typing description on the alpha keyboard overlay or by entering three digit
alpha character codes. To use three digit alpha character codes you must select 'No' in system
option #30 (See "System Option Programming). Also see Descriptor Programming Methods for
Alpha Overlay and/or Descriptor Code Table.
1. Turn the control lock to the PGM-Mode.
2. To begin the program, enter 8 0, press the SBTL key.
8
3. If you are programming alpha overlay
Type up to 18
descriptor keys
or,
Enter up to 18
three-character codes
4. To program additional function keys, repeat from step 3, or press the CASH key to finalise
the program.
CASH
NOTE: The MACRO (1 - 10) function keys descriptor is programmed with Programmed 711.
Please refer to Miscellaneous Programming - Macro Name Programming.
116 • Program Mode Programming
0 SBT L
X/TIME
FUNCT ION
KEY
FUNCTION
KEY
ER-380 / ER-380M Electronic Cash Register AU