Connection To Data Communication Equipment (Dce) - SignaMax 065-1163T User Manual

Signamax 㤠065
Connection to Data
Communication Equipment (DCE)
Data Communication Mode
1. Ensure that DIP switch #1 is in the "OFF" position.
(Disables Console mode)
2. Set DIP switches #2, #3 and #4 according to the wire type
as indicated below:
RS-232
4-wire
(RS-422/485)
2-wire
(RS-485)
3. Set DIP switch #7 to the "OFF" position for RS-232
applications. ("ON" position RS-422/485 applications)
4. Prepare TIA/EIA-574 compliant 'straight through'
shielded cables with DB-9 connectors. (see Appendix A and
Appendix B for further details)
5. Connect the male DB-9 connector at one end of the cable
to the converter's female DB-9 connector.
6. Connect the male or female DB-9 connector at the other
end of the cable to the DCE's male or female DB-9
connector.
-1163T RS-232/422/485 to 10/100BaseT/TX Media Converter
DIP 2
ON
OFF
OFF
Installation
DIP 3 DIP 4
OFF OFF
ON OFF
OFF ON
11