Ethernet is a trademark of Xerox Corporation. Microsoft Windows is a trademark of Microsoft Corporation. Signamax is a trademark of Advanced Electronic Support Products, Inc. User’s Manual...
Signamax Gigabit Ethernet Media Converter Preface This manual describes how to install and use the Signamax Gigabit Ethernet Media Converter. The Converter introduced here provides one channel media conversion solution: 10/100/1000BaseT/TX to 1000BaseSX/LX/BX with Link Fault Signaling function The Signamax Gigabit Ethernet Media Converter fully complies with IEEE802.3 10BaseT, IEEE802.3u 100BaseTX,...
Signamax Gigabit Ethernet Media Converter Introduction The Gigabit Ethernet Media Converter provides one channel for media conversion between 10/100/1000BaseT/TX to 1000BaseSX/LX/BX with Link Fault Signaling function. It can be used as a stand-alone device or with a standard 19” chassis as shown below.
Signamax Gigabit Ethernet Media Converter Product Features Complies with IEEE802.3 10BaseT, IEEE802.3u 100BaseTX, IEEE802.3ab 1000BaseT, and IEEE802.3z 1000BaseSX/LX. Supports IEEE802.3x Flow control: Flow control for Full-duplex and Back pressure for Half-duplex. DIP Switch configuration for “Link Fault Signaling”.
Signamax Gigabit Ethernet Media Converter One-Channel Media Converter Physical Ports Gigabit Ethernet Media Converter This converter provides port 1000BaseSX/LX/BX port. For the 1000BaseSX/LX/BX port, it provides options multimode/singlemode multimode/singlemode fiber. For the TX port, it uses RJ-45 connector and supports auto MDIX for uplink purpose.
Signamax Gigabit Ethernet Media Converter Installation This chapter gives step-by-step installation instructions for the Converter. Selecting a Site for the Equipment As with any electric device, you should place the equipment where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference.