Chapter 3: Installation; Selecting A Site For The Equipment - SignaMax 100BaseTX/FX to 100BaseFX Converter Series User Manual

Selecting a Site for the Equipment

As with any electric device, you should place the equipment
where it will not be subjected to extreme temperatures,
humidity, or electromagnetic interference. Specifically, the
site you select should meet the following requirements:
- The ambient temperature should be between 32 and 104
degrees Fahrenheit (0 to 40 degrees Celsius).
- The relative humidity should be less than 90 percent,
non-condensing.
- Surrounding electrical devices should not exceed the
electromagnetic field (RFC) standards for IEC 801-3, Level
2 (3V/M) field strength.
- Make sure that the equipment receives adequate
ventilation. Do not block the ventilation holes on each side
of the switch or the fan exhaust port on the side or rear of
the equipment.
- The power outlet should be within 6 feet (1.8 meters) of the
converter.
Signamax™ 100TX/FX to 100FX Media Converter
3
Installation
I
NSTALLATION
7