Wall Mounting - Panasonic KX-TDA30 Installation Manual

2.8.8 Wall Mounting

2.8.8 Wall Mounting
Mounting the KX-TDA0151
WARNING
•
Make sure that the wall that the unit will be attached to is strong enough to support the unit
(approx. 310 g). If not, it is necessary for the wall to be reinforced.
•
Only use the wall-mounting equipment (screws, washers, wall mounting plate) included with
the unit.
•
When driving the screws into the wall, be careful to avoid touching any metal laths, wire laths
or metal plates in the wall.
•
When this product is no longer in use, make sure to detach it from the wall.
1.
Place the reference for wall mounting (KX-TDA0151) on the wall to mark the 2 screw positions.
2.
Install the 2 screws and washers (included) into the wall.
Note
•
Make sure that the screw heads are at the same distance from the wall.
•
Install the screws perpendicular to the wall.
3.
Insert the upper and lower tabs of the wall mounting plate into the designated openings in the base unit.
KX-TDA0151
176 Installation Manual
Tabs