Sip-Gw4 Card (Kx-Tda3450) - Panasonic KX-TDA30 Installation Manual

2.3.9 SIP-GW4 Card (KX-TDA3450)

2.3.9 SIP-GW4 Card (KX-TDA3450)
Function
4-channel SIP gateway card. Compliant with RFC 3261, 3262, 3264, 3311, and 4028 protocols, and ITU-T G.
729A/B and G.711 CODEC methods.
(10BASE-T/100BASE-TX)
To LAN
To
Data Circuit Terminating
Equipment (DCE)
Accessories and User-supplied Items
Accessories (included): Ferrite core ´ 2, Extension Bolt ´ 1, Strap ´ 1, CD-ROM (including documentation
for web programming) ´ 1
User-supplied (not included): RJ45 connector
Note
•
The maximum length of the cable to be connected to this optional service card is 100 m.
•
When connecting the RJ45 connector, attach the included ferrite core. Refer to "2.2.9 Attaching a
Ferrite Core"
•
For programming instructions and other information about the SIP-GW4 card, refer to the
documentation for the SIP-GW4 card. To programme the SIP-GW4 card, use the web programming
designed for the SIP-GW4 card.
•
To confirm the trunk connection, refer to "Confirming the Trunk Connection" in "2.13.1 Starting the
PBX".
Switch Settings
Switch Usage and Status Definition
SW1 Set the switch at "ON" position before installing the card in the PBX.
DIP-SW Keep all DIP switches at default "OFF" positions.
86 Installation Manual
RJ45
LEDs
DIP-SW
Set the switch to
the "ON" position.
SW1 SW1