Installation Of The Maintenance Console; Installing And Starting The Maintenance Console - Panasonic KX-TDA30 Installation Manual

3.3.1 Installing and Starting the Maintenance Console

3.3 Installation of the Maintenance Console

3.3.1 Installing and Starting the Maintenance Console
System Requirements
Required Operating System
•
Microsoft Windows
®
Minimum Hardware Requirements
•
HDD: 100 MB of available hard disk space
Recommended Display Settings
• Screen resolution: XGA (1024 ´ 768)
•
DPI setting: Normal size (96 DPI)
Password Security
Warning to the Administrator or Installer regarding the system password
1.
Please provide all system passwords to the customer.
2.
To avoid unauthorised access and possible abuse of the PBX, keep the passwords secret, and inform the
customer of the importance of the passwords, and the possible dangers if they become known to others.
3.
The PBX has default passwords preset. For security, change these passwords the first time that you
programme the PBX.
4.
Change the passwords periodically.
5.
It is strongly recommended that passwords of 10 numbers or characters be used for maximum protection
against unauthorised access. For a list of numbers and characters that can be used in system passwords,
refer to "1.1.2 Entering Characters" in the PC Programming Manual.
Installing the Maintenance Console
Note
•
Make sure to install and use the latest version of the Maintenance Console.
•
To install or uninstall the software on a PC running Windows XP Professional, you must be logged in
as a user in either the "Administrators" or "Power Users" group.
•
To install or uninstall the software on a PC running Windows Vista Business, you must be logged in
as a user in the "Administrators" group.
•
To connect the PC to the PBX via USB, the KX-TDA USB driver must be installed. Follow the
instructions of the wizard to install the KX-TDA USB driver. When the PBX is first connected to the PC
via USB, you may be asked to select the appropriate USB driver. Browse for and select the KX-TDA
USB driver that was installed previously.
1.
Copy the setup file of the Maintenance Console to your PC.
2.
Double-click the setup file to run the installer.
3.
Follow the on-screen instructions provided by the installation wizard.
236 Installation Manual
XP or Windows Vista
®
Business
®