Panasonic KX-TDA30 Installation Manual page 237

Starting the Maintenance Console and Assigning the Basic Items (Quick
Setup)
When you start the Maintenance Console with the Installer Level Programmer Code and connect to the PBX
for the first time after initialisation (with the factory default setting), Quick Setup will launch automatically. During
Quick Setup, you will set up the basic items. For details about the basic items, refer to "2.3.4 Quick Setup" in
the Feature Guide.
3.3.1 Installing and Starting the Maintenance Console
1. Connect the PC to the PBX with a USB cable.
2. Start the Maintenance Console from the Start menu.
3. "Information before programming" appears.
a.
Carefully read this important additional information,
which includes updates to this and other manuals.
b.
Click OK to close this window.
a.
4.
Enter the Installer Level Programmer Code (default:
INSTALLER).
The Programmer Code authorises different program-
ming levels, and the Quick Setup is only available when
you start the Maintenance Console with the Installer
Level Programmer Code.
Note
There are 2 other Programmer Codes with limited
authorisation: Administrator Level (default: AD-
MIN), and User Level (default: USER).
b.
Click OK.
5. Click Connect.
6. a.
Select KX-TDA15/30 from PBX Model.
b.
Select the USB tab.
c.
Enter the system password for installer (default: 1234).
d.
Click Connect.
Note
To connect to the PBX via USB, the KX-TDA USB driver
must be installed on the PC, as explained above
in "Installing the Maintenance Console".
Installation Manual 237