Panasonic KX-TDA30 Installation Manual page 206

2.9.7 Connecting a Cell Station to the PBX
When the PS has not been registered yet
When registering the PS for the first time, it is possible to select the desired language for the display. (You do
not need to enter the PS system programming mode when registering for the first time.)
Using the KX-TD7685/KX-TD7695
Press
POWER for
2 seconds.
When the PS has already been registered to another PBX
One PS can be registered to a maximum of 4 different PBXs.
Using the KX-TD7685/KX-TD7695
Press POWER
for 2 seconds.
Select the desired
base (Base 1–4).
PS Termination
Confirm the following before cancelling the PS registration:
•
The PS is turned on.
•
The PS is within range.
[691]
ENTER
If "Rejected" or "Time out" is displayed
Press "CLEAR".
If "Rejected" or "Time out" is displayed
The registration information is still stored in the PS. You need to delete the registration information from the
PS.
206 Installation Manual
If required
Select the desired
language.
Select
"Setting Handset".
If required
System Lock Password
4 digits
C.Tone
PS No.
001 to 028
CLEAR YES
Press "YES".
C.Tone C.Tone
Press "F"
for 2
seconds.
Select
"System Option".
Select
"Register H/S".
ENTER
END
(HOLD)